{"title":"Hooks","description":"Forged and alloy lifting and rigging hooks — eye hoist hooks, swivel hooks, grab hooks, sling hooks, snap hooks and more.","products":[{"product_id":"yoke-x-175n-22-grade100-ball-bearing-hoist-hook-41887-lbs","title":"Yoke 7\/8\" Grade 100 Swivel Bearing Hoist Hook - WLL 41,887 lbs, #X-175N-22","description":"\u003cp\u003e\u003cstrong\u003eYOKE X-175N-22 Grade 100 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE X-175N-22 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The X-175N-22's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 19-ton WLL (41,887 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003cp\u003eBuilt to Grade 100 specification, the X-175N-22 is the correct component for Grade 100 chain sling assemblies and documented lifting programs requiring Grade 100 certified hardware throughout the rigging system.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX-175N-22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e19 tons (41,887 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGrade 100 Ball bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Grade 100 alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374161114,"sku":"X-175N-22","price":911.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_dfb83789-7e21-486f-9e6d-684754825189.webp?v=1781867933"},{"product_id":"yoke-x-175n-20-grade100-ball-bearing-hoist-hook-32000-lbs","title":"Yoke 3\/4\" Grade 100 Swivel Bearing Hoist Hook - WLL 32,000 lbs, #X-175N-20","description":"\u003cp\u003e\u003cstrong\u003eYOKE X-175N-20 Grade 100 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE X-175N-20 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The X-175N-20's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 14.5-ton WLL (32,000 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003cp\u003eBuilt to Grade 100 specification, the X-175N-20 is the correct component for Grade 100 chain sling assemblies and documented lifting programs requiring Grade 100 certified hardware throughout the rigging system.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX-175N-20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e14.5 tons (32,000 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGrade 100 Ball bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Grade 100 alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374226650,"sku":"X-175N-20","price":654.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_fac9555c-30bc-4dc2-9d0e-507c73f569e1.webp?v=1781867937"},{"product_id":"yoke-x-175n-16-grade100-ball-bearing-hoist-hook-20000-lbs","title":"Yoke 5\/8\" Grade 100 Swivel Bearing Hoist Hook - WLL 20,000 lbs, #X-175N-16","description":"\u003cp\u003e\u003cstrong\u003eYOKE X-175N-16 Grade 100 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE X-175N-16 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The X-175N-16's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 9-ton WLL (20,000 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003cp\u003eBuilt to Grade 100 specification, the X-175N-16 is the correct component for Grade 100 chain sling assemblies and documented lifting programs requiring Grade 100 certified hardware throughout the rigging system.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX-175N-16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e9 tons (20,000 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGrade 100 Ball bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Grade 100 alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374292186,"sku":"X-175N-16","price":377.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_374b4e8f-5ece-4e59-92fc-f5f44b642d6b.webp?v=1781867940"},{"product_id":"yoke-x-175n-13-grade100-ball-bearing-hoist-hook-13400-lbs","title":"Yoke 1\/2\" Grade 100 Swivel Bearing Hoist Hook - WLL 13,400 lbs, #X-175N-13","description":"\u003cp\u003e\u003cstrong\u003eYOKE X-175N-13 Grade 100 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE X-175N-13 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The X-175N-13's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 6-ton WLL (13,400 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003cp\u003eBuilt to Grade 100 specification, the X-175N-13 is the correct component for Grade 100 chain sling assemblies and documented lifting programs requiring Grade 100 certified hardware throughout the rigging system.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX-175N-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e6 tons (13,400 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGrade 100 Ball bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Grade 100 alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374357722,"sku":"X-175N-13","price":260.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_f856e382-38a4-4677-8728-acd9f15c094d.webp?v=1781867943"},{"product_id":"yoke-x-175n-10-grade100-ball-bearing-hoist-hook-8000-lbs","title":"Yoke 3\/8\" Grade 100 Swivel Bearing Hoist Hook - WLL 8,000 lbs, #X-175N-10","description":"\u003cp\u003e\u003cstrong\u003eYOKE X-175N-10 Grade 100 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE X-175N-10 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The X-175N-10's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 3.6-ton WLL (8,000 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003cp\u003eBuilt to Grade 100 specification, the X-175N-10 is the correct component for Grade 100 chain sling assemblies and documented lifting programs requiring Grade 100 certified hardware throughout the rigging system.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX-175N-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e3.6 tons (8,000 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGrade 100 Ball bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Grade 100 alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374423258,"sku":"X-175N-10","price":196.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_3cfd1cdc-9a3b-4b0f-a23d-e063f42a4ffa.webp?v=1781867947"},{"product_id":"yoke-x-175-22-grade100-swivel-hoist-hook-41887-lbs","title":"Yoke 7\/8\" Grade 100 Alloy Swivel Hoist Latch Hook - WLL 41,887 lbs, #X-175-22","description":"\u003cp\u003e\u003cstrong\u003eYOKE X-175-22 Grade 100 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE X-175-22 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe X-175-22's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged Grade 100 alloy steel and rated at 19 tons WLL (41,887 lbs), the X-175-22 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003cp\u003eBuilt to Grade 100 specification, the X-175-22 meets the higher strength requirements of Grade 100 chain sling systems and documented lifting programs requiring Grade 100 certified components throughout the rigging assembly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX-175-22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e19 tons (41,887 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGrade 100 Alloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Grade 100 alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374488794,"sku":"X-175-22","price":769.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_98d24269-fa39-4503-8a58-8213fd0bdc5b.webp?v=1781867951"},{"product_id":"yoke-8-175n-22-ball-bearing-swivel-hoist-hook-48502-lbs","title":"Yoke Alloy Swivel Ball Bearing Hoist Hook w\/Latch - WLL 48,502 lbs, #8-175N-22","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175N-22 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE 8-175N-22 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The 8-175N-22's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 22-ton WLL (48,502 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175N-22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e22 tons (48,502 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBall bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374587098,"sku":"8-175N-22","price":1795.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_5c7e1382-8daa-4094-bbe5-4e8c9b8b0805.webp?v=1781867954"},{"product_id":"yoke-8-175n-11-ball-bearing-swivel-hoist-hook-24251-lbs","title":"Yoke 3\/4\" Alloy Swivel Ball Bearing Hoist Hook w\/Latch - WLL 24,251 lbs, #8-175N-11","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175N-11 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE 8-175N-11 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The 8-175N-11's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 11-ton WLL (24,251 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175N-11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e11 tons (24,251 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBall bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374718170,"sku":"8-175N-11","price":654.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_bcbd0aa8-8c97-4b38-a3aa-bde3983069e4.webp?v=1781867958"},{"product_id":"yoke-8-175n-07-ball-bearing-swivel-hoist-hook-15432-lbs","title":"Yoke 5\/8\" Alloy Swivel Ball Bearing Hoist Hook w\/Latch - WLL 15,432 lbs, #8-175N-07","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175N-07 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE 8-175N-07 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The 8-175N-07's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 7-ton WLL (15,432 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175N-07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e7 tons (15,432 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBall bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374816474,"sku":"8-175N-07","price":377.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_0a78db3f-9f40-44e0-9233-9a3d8e5b1131.webp?v=1781867961"},{"product_id":"yoke-8-175n-05-ball-bearing-swivel-hoist-hook-11023-lbs","title":"Yoke 1\/2\" Alloy Swivel Ball Bearing Hoist Hook w\/Latch - WLL 11,023 lbs, #8-175N-05","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175N-05 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE 8-175N-05 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The 8-175N-05's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 5-ton WLL (11,023 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175N-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e5 tons (11,023 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBall bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374882010,"sku":"8-175N-05","price":260.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_e6963d75-118d-4338-92ec-d9420a9b67ab.webp?v=1781867964"},{"product_id":"yoke-8-175n-03-ball-bearing-swivel-hoist-hook-6614-lbs","title":"Yoke 3\/8\" Alloy Swivel Ball Bearing Hoist Hook w\/Latch - WLL 6,614 lbs, #8-175N-03","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175N-03 Ball Bearing Swivel Hoist Hook – Smooth Rotation Under Load. Not Just Before It.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's an important distinction between a swivel hook and a ball bearing swivel hook — and it matters most when the load is on. Standard swivel hooks are designed for pre-lift positioning. The YOKE 8-175N-03 goes further: its internal ball bearing supports controlled, smooth rotation while the load is actively suspended — absorbing torsional forces at the hook rather than allowing them to travel up into the chain, wire rope, or sling assembly above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall Bearing Precision. Real-World Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn overhead crane systems, electric and manual hoists, and lifting blocks where the alignment between the lifting device and the load shifts during hoisting or positioning, a standard swivel creates friction and resistance that transfers stress into the rigging. The 8-175N-03's internal ball bearing mechanism eliminates that friction — rotating smoothly and consistently under the full 3-ton WLL (6,614 lbs) without binding, jerking, or degrading hook performance over repeated lift cycles. The integrated safety latch retains chain slings, wire rope slings, eye bolts, and lifting attachments throughout the handling cycle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175N-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e3 tons (6,614 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBall bearing swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal ball bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eOverhead cranes, electric\/manual hoists, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077374947546,"sku":"8-175N-03","price":196.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175n_jpg_430x_f5736813-4ab2-429e-b0e3-82c094aac6a2.webp?v=1781867968"},{"product_id":"yoke-8-175-15-alloy-swivel-hoist-hook-33069-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 33,069 lbs, #8-175-15","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-15 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE 8-175-15 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-175-15's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged alloy steel and rated at 15 tons WLL (33,069 lbs), the 8-175-15 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e15 tons (33,069 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375013082,"sku":"8-175-15","price":769.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_64da25cd-7dde-4bef-ac80-da6b4ef4fc69.webp?v=1781867971"},{"product_id":"yoke-8-175-11-alloy-swivel-hoist-hook-24251-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 24,251 lbs, #8-175-11","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-11 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE 8-175-11 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-175-11's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged alloy steel and rated at 11 tons WLL (24,251 lbs), the 8-175-11 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e11 tons (24,251 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375078618,"sku":"8-175-11","price":578.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_7e0fa1e1-3c51-44f4-9fe8-09c1b5b95e00.webp?v=1781867974"},{"product_id":"yoke-8-175-07-alloy-swivel-hoist-hook-15432-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 15,432 lbs, #8-175-07","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-07 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE 8-175-07 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-175-07's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged alloy steel and rated at 7 tons WLL (15,432 lbs), the 8-175-07 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e7 tons (15,432 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375176922,"sku":"8-175-07","price":333.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_368874f7-cf3f-45f4-aa15-e30e6c72dd41.webp?v=1781867978"},{"product_id":"yoke-8-175-05-alloy-swivel-hoist-hook-11023-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 11,023 lbs, #8-175-05","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-05 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE 8-175-05 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-175-05's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged alloy steel and rated at 5 tons WLL (11,023 lbs), the 8-175-05 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e5 tons (11,023 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375275226,"sku":"8-175-05","price":186.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_c4fb8f47-5b72-4963-be35-db08aba4a0f7.webp?v=1781867982"},{"product_id":"yoke-8-175-015-alloy-swivel-hoist-hook-3307-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 3,307 lbs, #8-175-015","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-015 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE 8-175-015 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-175-015's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged alloy steel and rated at 1.5 tons WLL (3,307 lbs), the 8-175-015 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e1.5 tons (3,307 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375373530,"sku":"8-175-015","price":84.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_096fb883-3b61-4ac7-ae0d-09a70fb8f89c.webp?v=1781867987"},{"product_id":"yoke-8-175-03-alloy-swivel-hoist-hook-6614-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 6,614 lbs, #8-175-03","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-03 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Retains the Connection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn hoisting and overhead lifting systems where chain, wire rope, or synthetic slings naturally want to twist during the lift, a fixed hook transfers that torsional stress directly into the rigging assembly. The YOKE 8-175-03 solves that problem at the source — its swivel eye rotates under load, allowing the hook to align with the load path and absorb rotational movement without winding up the sling or introducing twist into the rigging system above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel That Works Under Load\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-175-03's swivel function isn't limited to pre-lift positioning — it's designed for rotation during active hoisting and load handling, making it the correct specification for electric hoists, manual chain hoists, overhead cranes, and lifting blocks where load spin and alignment correction are genuine operational requirements. The integrated safety latch retains slings, eye bolts, and lifting attachments throughout the handling cycle, limiting unintentional disengagement during movement and positioning.\u003c\/p\u003e\n\u003cp\u003eManufactured from forged alloy steel and rated at 3 tons WLL (6,614 lbs), the 8-175-03 is suitable for use with chain slings, wire rope slings, and standard lifting attachments across industrial facilities, fabrication shops, warehouses, and maintenance operations.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e3 tons (6,614 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAlloy swivel hoist hook with safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eRotates under load — reduces sling twist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eIntegrated safety latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eElectric hoists, chain hoists, overhead cranes, lifting blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375635674,"sku":"8-175-03","price":123.76,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-175_jpg_430x_98dc6b36-9b93-49b8-afe7-bbaa40c0d769.webp?v=1781867992"},{"product_id":"yoke-8-175-015-alloy-swivel-hoist-hook-w-latch-wll-3307-lbs","title":"Yoke Alloy Swivel Hoist Hook W\/Latch - WLL 3,307 lbs, #8-175-015","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-175-015 Alloy Swivel Hoist Hook with Latch – Rotates Under Load. Latch Included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe YOKE 8-175-015 Alloy Swivel Hoist Hook ships as a complete, ready-to-install component — forged, latched, and built for hoist and crane applications where load rotation and alignment during the lift are operational requirements. The swivel design allows the hook to freely rotate, preventing torsional stress buildup in the rigging assembly and enabling loads to naturally align throughout the lift cycle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwivel Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe swivel eye connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning. Forged from alloy steel for consistent strength and durability across overhead handling environments.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-175-015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e3,307 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSwivel hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eSwivel eye — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375766746,"sku":"8-175-015","price":84.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_c7283dbd-ec4a-4f97-b734-80fa2b5e3eda.webp?v=1781867996"},{"product_id":"yoke-8-173-30-alloy-eye-hoist-hook-w-latch-wll-66139-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 66,139 lbs, #8-173-30","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-30 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-30 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-30 delivers a reliable, compact solution rated at 66,139 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-30's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e66,139 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077375996122,"sku":"8-173-30","price":1546.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_770c9eb1-6706-46b1-8f77-73d6ca0c49ba.webp?v=1781867999"},{"product_id":"yoke-8-173-22-alloy-eye-hoist-hook-w-latch-wll-48502-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 48,502 lbs, #8-173-22","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-22 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-22 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-22 delivers a reliable, compact solution rated at 48,502 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-22's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e48,502 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376061658,"sku":"8-173-22","price":915.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_ec73c4dc-bd8c-4236-9004-806d07052cf5.webp?v=1781868003"},{"product_id":"yoke-8-173-15-alloy-eye-hoist-hook-w-latch-wll-33069-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 33,069 lbs, #8-173-15","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-15 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-15 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-15 delivers a reliable, compact solution rated at 33,069 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-15's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e33,069 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376159962,"sku":"8-173-15","price":366.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_43555c0c-eb6c-433d-8289-6a943b575d4b.webp?v=1781868007"},{"product_id":"yoke-8-173-11-alloy-eye-hoist-hook-w-latch-wll-24251-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 24,251 lbs, #8-173-11","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-11 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-11 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-11 delivers a reliable, compact solution rated at 24,251 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-11's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e24,251 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376225498,"sku":"8-173-11","price":269.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_a3c3217b-b02c-41eb-97c7-f7640fd0d1bf.webp?v=1781868012"},{"product_id":"yoke-8-173-07-alloy-eye-hoist-hook-w-latch-wll-15432-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 15,432 lbs, #8-173-07","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-07 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-07 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-07 delivers a reliable, compact solution rated at 15,432 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-07's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e15,432 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376291034,"sku":"8-173-07","price":145.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_79e5cc1b-7800-4571-b652-d8a948b71d7d.webp?v=1781868017"},{"product_id":"yoke-8-173-01-alloy-eye-hoist-hook-w-latch-wll-2205-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 2,205 lbs, #8-173-01","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-01 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-01 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-01 delivers a reliable, compact solution rated at 2,205 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-01's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e2,205 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376356570,"sku":"8-173-01","price":25.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_7f55d163-80b0-4890-ad97-7d3ec3452d38.webp?v=1781868019"},{"product_id":"yoke-8-173-03-alloy-eye-hoist-hook-w-latch-wll-6614-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 6,614 lbs, #8-173-03","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-03 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-03 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-03 delivers a reliable, compact solution rated at 6,614 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-03's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e6,614 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376422106,"sku":"8-173-03","price":46.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_e2acc7c4-0bf1-47b9-84d2-1ff88a80e546.webp?v=1781868023"},{"product_id":"yoke-8-173-05-alloy-eye-hoist-hook-w-latch-wll-11023-lbs","title":"Yoke Alloy Eye Hoist Hook W\/Latch - WLL 11,023 lbs, #8-173-05","description":"\u003cp\u003e\u003cstrong\u003eYOKE 8-173-05 Alloy Eye Hoist Hook with Latch – Drop-In Ready. Latch Included. Built to Last.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a hoist hook wears out or needs replacing, downtime costs money. The YOKE 8-173-05 Alloy Eye Hoist Hook ships as a complete, finished component — forged, latched, and ready to integrate directly into existing lifting assemblies without additional hardware or modification. Whether you're replacing a worn hook on a fixed hoist installation or building a new overhead handling system from scratch, the 8-173-05 delivers a reliable, compact solution rated at 11,023 lbs WLL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye Connection. Latch Included. Secure From the Start.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eye-style connection attaches directly to master links, wire rope eyes, chain slings, and mechanical lifting devices — covering the full range of overhead handling connection points found in manufacturing facilities, warehouses, and maintenance operations. The integrated latch limits unintentional disengagement of slings and fittings during hoisting and load positioning, providing the basic retention security that overhead lifting tasks require during movement.\u003c\/p\u003e\n\u003cp\u003eForged from alloy steel for consistent strength and durability, the 8-173-05's compact hook geometry fits naturally into the tight clearances of fixed hoist installations and mobile crane systems where larger hooks would create interference or handling problems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e8-173-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL\u003c\/td\u003e\n\u003ctd\u003e11,023 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEye hoist hook with integrated latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eEye — direct attachment to hoists \u0026amp; slings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eHoists, cranes, overhead lifting, industrial rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003eReady-to-install finished component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"YOKE","offers":[{"title":"Default Title","offer_id":48077376487642,"sku":"8-173-05","price":79.01,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-8-173_jpg_430x_37469324-0f8b-4659-adcd-a0d33e43fb17.webp?v=1781868026"},{"product_id":"crosby-1-ton-s-3316-hoist-replacement-hook","title":"Crosby 1 Ton S-3316 Hoist Replacement Hook","description":"\u003cul\u003e\n\u003cli\u003eEasily attaches to any electric hoist with welded link load chain, roller chain or wire rope with suitable end fitting\u003c\/li\u003e\n\u003cli\u003eSuitable for infrequent, non-continuous rotation under load\u003c\/li\u003e\n\u003cli\u003eSwivel jaw is forged\u003c\/li\u003e\n\u003cli\u003eUse in corrosive environments requires shank and nut inspection in accordance with ASME B30.10-1.10.4(b)(5)(c)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077393658074,"sku":"'1023047","price":167.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-ton-s-3316-hoist-replacement-hook-1023047-42__72541_430x_a55bb6ba-f401-46e9-9b50-d7a01e0bb48c.jpg?v=1781868265"},{"product_id":"crosby-1-1-4-a-1328-grade-100-eye-grab-hook-90400-lbs-wll","title":"Crosby 1-1\/4\" A-1328 Grade 100 Eye Grab Hook - 90400 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077393756378,"sku":"'1026241","price":719.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_5eed69c1-3613-4d3b-938a-da83c37c8ec6.jpg?v=1781868268"},{"product_id":"crosby-7-8-a-1328-grade-100-eye-grab-hook-44100-lbs-wll","title":"Crosby 7\/8\" A-1328 Grade 100 Eye Grab Hook - 44100 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077393887450,"sku":"'1026223","price":277.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_d0c0405f-3b8f-4d25-b87d-d63060bfb3ca.jpg?v=1781868271"},{"product_id":"crosby-1-a-1328-grade-100-eye-grab-hook-59700-lbs-wll","title":"Crosby 1\" A-1328 Grade 100 Eye Grab Hook - 59700 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394018522,"sku":"'1026232","price":696.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_8c3ae9ee-46e0-40a0-a7e3-4698734cde40.jpg?v=1781868275"},{"product_id":"crosby-3-4-a-1328-grade-100-eye-grab-hook-35300-lbs-wll","title":"Crosby 3\/4\" A-1328 Grade 100 Eye Grab Hook - 35300 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394313434,"sku":"'1026214","price":208.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_ab74c030-c7e0-4b16-9bc9-4b59d7009977.jpg?v=1781868278"},{"product_id":"crosby-3-8-a-1328-grade-100-eye-grab-hook-8800-lbs-wll","title":"Crosby 3\/8\" A-1328 Grade 100 Eye Grab Hook - 8800 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394411738,"sku":"'1026187","price":40.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_df384ea9-bf97-4eff-ab72-c50503a87050.jpg?v=1781868282"},{"product_id":"crosby-5-8-a-1328-grade-100-eye-grab-hook-22600-lbs-wll","title":"Crosby 5\/8\" A-1328 Grade 100 Eye Grab Hook - 22600 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394510042,"sku":"'1026205","price":136.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_405b39c9-2274-4e31-a7ee-5ea65ddafeca.jpg?v=1781868286"},{"product_id":"crosby-9-32-a-1328-grade-100-eye-grab-hook-5700-lbs-wll","title":"Crosby 9\/32\" (1\/4\") - 5\/16\" A-1328 Grade 100 Eye Grab Hook - 5700 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394575578,"sku":"'1026169","price":30.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_33e05490-8b4e-4a72-a55b-4fba58aa06f7.jpg?v=1781868290"},{"product_id":"crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll","title":"Crosby 1\/2\" A-1328 Grade 100 Eye Grab Hook - 15000 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1328 Grade 100 Eye Grab Hook – Closed Eye. Slim Profile. Built for Tight Rigging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen space is at a premium and a permanent chain attachment point is required, the Crosby A-1328 Eye Grab Hook delivers. Its closed-eye design provides a fixed, secure connection point for chain slings and rigging assemblies — and its slim, compact profile allows it to fit into tight rigging configurations where bulkier clevis-style hooks simply won't work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnow Your Hook — Important Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-1328 is a grab hook, not a cradle hook. It does not feature a supporting saddle, which means it should not be used as a chain shortening hook on a chain sling assembly. For shortening applications, the Crosby A-1338 Cradle Clevis Grab Hook is the correct specification. The A-1328 is purpose-built for permanent chain attachment points where its slim profile and closed-eye geometry offer a genuine advantage over wider, bulkier alternatives.\u003c\/p\u003e\n\u003cp\u003eForged from quenched and tempered alloy steel, individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL, the A-1328 carries a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for complete material traceability throughout its service life.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEye Type\u003c\/td\u003e\n\u003ctd\u003eClosed eye — permanent attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSlim — designed for tight rigging spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortening Use\u003c\/td\u003e\n\u003ctd\u003eNot suitable — no cradle\/saddle design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394673882,"sku":"'1026196","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1328-grade-100-eye-grab-hook-15000-lbs-wll-1026196-37__22836_430x_23ddeb34-1a49-4367-967f-2af4f00249ca.jpg?v=1781868294"},{"product_id":"crosby-5-8-a-1338-grade-100-clevis-grab-hook-22600-lbs-wll","title":"Crosby 5\/8\" A-1338 Grade 100 Clevis Grab Hook - 22600 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1338 Cradle Clevis Grab Hook – 100% Chain Efficiency. Zero Capacity Loss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard grab hooks reduce working load limit at the contact point. The Crosby A-1338 eliminates that compromise entirely. Its cradle (saddle) design supports the chain link from below — distributing load forces across the full bearing surface rather than concentrating them at a single contact point — delivering 100% efficiency of Grade 100 chain with no reduction in WLL. For chain shortening and choker hitch applications where maintaining full rated capacity matters, the A-1338 is the engineering answer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClevis Pin. Direct Connection. No Extra Links.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clevis pin attachment connects directly to Grade 100 or Grade 80 chain slings without requiring intermediate coupling links — simplifying assembly and reducing the number of components in the rigging system. Each A-1338 is individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL — performance benchmarks that go well beyond standard grab hook specifications.\u003c\/p\u003e\n\u003cp\u003eEvery hook is forged from quenched and tempered alloy steel, marked with a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for full traceability, and finished in Crosby's signature platinum color for instant identification as a genuine Grade 100 alloy product on the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe Use — Two Important Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen hooking back to the chain leg in a choker hitch configuration, maintain a choke angle of 120° or greater. When used as a chain shortener, minimize chain twist and ensure full engagement in the hook before applying load.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Efficiency\u003c\/td\u003e\n\u003ctd\u003e100% — no WLL reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100 \u0026amp; Grade 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment\u003c\/td\u003e\n\u003ctd\u003eClevis pin — direct chain connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlatinum — Crosby Grade 100 identifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394739418,"sku":"'1049453","price":232.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1338-clevis-cradle-grab-hook-1049444-69__02514_430x_08e3cebb-c5d7-458d-955e-b61487abbed3.jpg?v=1781868296"},{"product_id":"crosby-9-32-a-1338-grade-100-clevis-grab-hook-4300-lbs-wll","title":"Crosby 9\/32\" (1\/4\") A-1338 Grade 100 Clevis Grab Hook - 4300 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1338 Cradle Clevis Grab Hook – 100% Chain Efficiency. Zero Capacity Loss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard grab hooks reduce working load limit at the contact point. The Crosby A-1338 eliminates that compromise entirely. Its cradle (saddle) design supports the chain link from below — distributing load forces across the full bearing surface rather than concentrating them at a single contact point — delivering 100% efficiency of Grade 100 chain with no reduction in WLL. For chain shortening and choker hitch applications where maintaining full rated capacity matters, the A-1338 is the engineering answer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClevis Pin. Direct Connection. No Extra Links.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clevis pin attachment connects directly to Grade 100 or Grade 80 chain slings without requiring intermediate coupling links — simplifying assembly and reducing the number of components in the rigging system. Each A-1338 is individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL — performance benchmarks that go well beyond standard grab hook specifications.\u003c\/p\u003e\n\u003cp\u003eEvery hook is forged from quenched and tempered alloy steel, marked with a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for full traceability, and finished in Crosby's signature platinum color for instant identification as a genuine Grade 100 alloy product on the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe Use — Two Important Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen hooking back to the chain leg in a choker hitch configuration, maintain a choke angle of 120° or greater. When used as a chain shortener, minimize chain twist and ensure full engagement in the hook before applying load.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Efficiency\u003c\/td\u003e\n\u003ctd\u003e100% — no WLL reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100 \u0026amp; Grade 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment\u003c\/td\u003e\n\u003ctd\u003eClevis pin — direct chain connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlatinum — Crosby Grade 100 identifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394837722,"sku":"'1049417","price":77.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1338-clevis-cradle-grab-hook-1049444-69__02514_430x_6262bc95-68ae-417c-9338-40e828cdeb4a.jpg?v=1781868300"},{"product_id":"crosby-5-16-a-1338-grade-100-clevis-grab-hook-5700-lbs-wll","title":"Crosby 5\/16\" A-1338 Grade 100 Clevis Grab Hook - 5700 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1338 Cradle Clevis Grab Hook – 100% Chain Efficiency. Zero Capacity Loss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard grab hooks reduce working load limit at the contact point. The Crosby A-1338 eliminates that compromise entirely. Its cradle (saddle) design supports the chain link from below — distributing load forces across the full bearing surface rather than concentrating them at a single contact point — delivering 100% efficiency of Grade 100 chain with no reduction in WLL. For chain shortening and choker hitch applications where maintaining full rated capacity matters, the A-1338 is the engineering answer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClevis Pin. Direct Connection. No Extra Links.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clevis pin attachment connects directly to Grade 100 or Grade 80 chain slings without requiring intermediate coupling links — simplifying assembly and reducing the number of components in the rigging system. Each A-1338 is individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL — performance benchmarks that go well beyond standard grab hook specifications.\u003c\/p\u003e\n\u003cp\u003eEvery hook is forged from quenched and tempered alloy steel, marked with a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for full traceability, and finished in Crosby's signature platinum color for instant identification as a genuine Grade 100 alloy product on the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe Use — Two Important Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen hooking back to the chain leg in a choker hitch configuration, maintain a choke angle of 120° or greater. When used as a chain shortener, minimize chain twist and ensure full engagement in the hook before applying load.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Efficiency\u003c\/td\u003e\n\u003ctd\u003e100% — no WLL reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100 \u0026amp; Grade 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment\u003c\/td\u003e\n\u003ctd\u003eClevis pin — direct chain connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlatinum — Crosby Grade 100 identifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077394968794,"sku":"'1049426","price":83.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1338-clevis-cradle-grab-hook-1049444-69__02514_430x_cc0cbaf4-23eb-4f38-ae03-27a2f0927af0.jpg?v=1781868304"},{"product_id":"crosby-1-2-a-1338-grade-100-clevis-grab-hook-15000-lbs-wll","title":"Crosby 1\/2\" A-1338 Grade 100 Clevis Grab Hook - 15000 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1338 Cradle Clevis Grab Hook – 100% Chain Efficiency. Zero Capacity Loss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard grab hooks reduce working load limit at the contact point. The Crosby A-1338 eliminates that compromise entirely. Its cradle (saddle) design supports the chain link from below — distributing load forces across the full bearing surface rather than concentrating them at a single contact point — delivering 100% efficiency of Grade 100 chain with no reduction in WLL. For chain shortening and choker hitch applications where maintaining full rated capacity matters, the A-1338 is the engineering answer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClevis Pin. Direct Connection. No Extra Links.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clevis pin attachment connects directly to Grade 100 or Grade 80 chain slings without requiring intermediate coupling links — simplifying assembly and reducing the number of components in the rigging system. Each A-1338 is individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL — performance benchmarks that go well beyond standard grab hook specifications.\u003c\/p\u003e\n\u003cp\u003eEvery hook is forged from quenched and tempered alloy steel, marked with a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for full traceability, and finished in Crosby's signature platinum color for instant identification as a genuine Grade 100 alloy product on the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe Use — Two Important Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen hooking back to the chain leg in a choker hitch configuration, maintain a choke angle of 120° or greater. When used as a chain shortener, minimize chain twist and ensure full engagement in the hook before applying load.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Efficiency\u003c\/td\u003e\n\u003ctd\u003e100% — no WLL reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100 \u0026amp; Grade 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment\u003c\/td\u003e\n\u003ctd\u003eClevis pin — direct chain connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlatinum — Crosby Grade 100 identifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395099866,"sku":"'1049444","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1338-clevis-cradle-grab-hook-1049444-69__02514_430x_b58a642a-ea8c-49dd-8250-07e870ffb04d.jpg?v=1781868308"},{"product_id":"crosby-3-8-a-1338-grade-100-clevis-grab-hook-8800-lbs-wll","title":"Crosby 3\/8\" A-1338 Grade 100 Clevis Grab Hook - 8800 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby A-1338 Cradle Clevis Grab Hook – 100% Chain Efficiency. Zero Capacity Loss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard grab hooks reduce working load limit at the contact point. The Crosby A-1338 eliminates that compromise entirely. Its cradle (saddle) design supports the chain link from below — distributing load forces across the full bearing surface rather than concentrating them at a single contact point — delivering 100% efficiency of Grade 100 chain with no reduction in WLL. For chain shortening and choker hitch applications where maintaining full rated capacity matters, the A-1338 is the engineering answer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClevis Pin. Direct Connection. No Extra Links.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clevis pin attachment connects directly to Grade 100 or Grade 80 chain slings without requiring intermediate coupling links — simplifying assembly and reducing the number of components in the rigging system. Each A-1338 is individually proof tested at 2.5× WLL with full certification, fatigue rated to 20,000 cycles at 1.5× WLL, and engineered to withstand an ultimate load of 4× WLL — performance benchmarks that go well beyond standard grab hook specifications.\u003c\/p\u003e\n\u003cp\u003eEvery hook is forged from quenched and tempered alloy steel, marked with a Product Identification Code (PIC) alongside Crosby, U.S.A., and size markings for full traceability, and finished in Crosby's signature platinum color for instant identification as a genuine Grade 100 alloy product on the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe Use — Two Important Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen hooking back to the chain leg in a choker hitch configuration, maintain a choke angle of 120° or greater. When used as a chain shortener, minimize chain twist and ensure full engagement in the hook before applying load.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Efficiency\u003c\/td\u003e\n\u003ctd\u003e100% — no WLL reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Chain\u003c\/td\u003e\n\u003ctd\u003eGrade 100 \u0026amp; Grade 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment\u003c\/td\u003e\n\u003ctd\u003eClevis pin — direct chain connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL (individually certified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Load\u003c\/td\u003e\n\u003ctd\u003e4× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlatinum — Crosby Grade 100 identifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003ePIC + Crosby, U.S.A., size markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395165402,"sku":"'1049435","price":90.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-1-2-a-1338-clevis-cradle-grab-hook-1049444-69__02514_430x_4b6f49b8-5e09-47b6-be6b-798c4c1f132c.jpg?v=1781868311"},{"product_id":"crosby-l-3322b-15-ton-alloy-ball-bearing-swivel-hook-w-latch","title":"Crosby L-3322B 15 Ton Alloy Ball Bearing Swivel Hook w\/ Latch","description":"\u003cp\u003e\u003cstrong\u003eCrosby L-3322B Bearing Swivel Hook – Full 360° Rotation Under Load. QUIC-CHECK® Built In.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost swivel hooks allow positioning before the lift. The Crosby L-3322B goes further — its precision bearing design enables full 360° rotation under load, allowing loads to naturally align, reposition, and rotate throughout the entire lift cycle without transmitting torsional stress back into the rigging system. For operations where load spin, alignment correction, or rotation during the lift are genuine requirements, the L-3322B is the engineered solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated. Not Just a Swivel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe distinction matters. A standard swivel eye allows pre-lift positioning but is not designed for rotation under load. The L-3322B's precision load-rated bearing is engineered to handle rotational forces at full working load — smoothly, consistently, and without binding or degrading hook performance. The result is cleaner lifts, less torsional wear on connected rigging, and better load control from hook-on to set-down.\u003c\/p\u003e\n\u003cp\u003eEvery L-3322B features QUIC-CHECK® deformation and angle indicators forged directly into the hook body — enabling instant visual assessment of overload deformation and load angle compliance without removing the hook from service. The low-profile hook tip is designed specifically for Crosby S-4320 or PL-N latch kits, with every hook shipping latch pre-installed at no extra cost. Replacement kits are available separately.\u003c\/p\u003e\n\u003cp\u003eForged, quenched, and tempered from high-strength alloy steel in a distinctive red finish, proof tested to 2.5× WLL, built to a 4.5:1 design factor, and meeting or exceeding ASME B30.10 across the full 2 to 15 metric ton range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e2 – 15 metric tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRed (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eFull 360° under load via precision bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInspection\u003c\/td\u003e\n\u003ctd\u003eQUIC-CHECK® deformation \u0026amp; angle indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003ePre-installed S-4320 or PL-N kit; replacements available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B30.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395263706,"sku":"'1028654","price":1025.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch-1028645-18__23417_430x_0d73a46c-2212-48ed-906e-3545b8601cd6.jpg?v=1781868316"},{"product_id":"crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch","title":"Crosby L-3322B 11 Ton Alloy Ball Bearing Swivel Hook w\/ Latch","description":"\u003cp\u003e\u003cstrong\u003eCrosby L-3322B Bearing Swivel Hook – Full 360° Rotation Under Load. QUIC-CHECK® Built In.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost swivel hooks allow positioning before the lift. The Crosby L-3322B goes further — its precision bearing design enables full 360° rotation under load, allowing loads to naturally align, reposition, and rotate throughout the entire lift cycle without transmitting torsional stress back into the rigging system. For operations where load spin, alignment correction, or rotation during the lift are genuine requirements, the L-3322B is the engineered solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated. Not Just a Swivel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe distinction matters. A standard swivel eye allows pre-lift positioning but is not designed for rotation under load. The L-3322B's precision load-rated bearing is engineered to handle rotational forces at full working load — smoothly, consistently, and without binding or degrading hook performance. The result is cleaner lifts, less torsional wear on connected rigging, and better load control from hook-on to set-down.\u003c\/p\u003e\n\u003cp\u003eEvery L-3322B features QUIC-CHECK® deformation and angle indicators forged directly into the hook body — enabling instant visual assessment of overload deformation and load angle compliance without removing the hook from service. The low-profile hook tip is designed specifically for Crosby S-4320 or PL-N latch kits, with every hook shipping latch pre-installed at no extra cost. Replacement kits are available separately.\u003c\/p\u003e\n\u003cp\u003eForged, quenched, and tempered from high-strength alloy steel in a distinctive red finish, proof tested to 2.5× WLL, built to a 4.5:1 design factor, and meeting or exceeding ASME B30.10 across the full 2 to 15 metric ton range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e2 – 15 metric tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRed (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eFull 360° under load via precision bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInspection\u003c\/td\u003e\n\u003ctd\u003eQUIC-CHECK® deformation \u0026amp; angle indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003ePre-installed S-4320 or PL-N kit; replacements available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B30.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395329242,"sku":"'1028645","price":735.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch-1028645-18__23417_430x_9fb75f82-5797-4552-b7fc-e57c3eafff1d.jpg?v=1781868320"},{"product_id":"crosby-l-3322b-7-ton-alloy-ball-bearing-swivel-hook-w-latch","title":"Crosby L-3322B 7 Ton Alloy Ball Bearing Swivel Hook w\/ Latch","description":"\u003cp\u003e\u003cstrong\u003eCrosby L-3322B Bearing Swivel Hook – Full 360° Rotation Under Load. QUIC-CHECK® Built In.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost swivel hooks allow positioning before the lift. The Crosby L-3322B goes further — its precision bearing design enables full 360° rotation under load, allowing loads to naturally align, reposition, and rotate throughout the entire lift cycle without transmitting torsional stress back into the rigging system. For operations where load spin, alignment correction, or rotation during the lift are genuine requirements, the L-3322B is the engineered solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated. Not Just a Swivel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe distinction matters. A standard swivel eye allows pre-lift positioning but is not designed for rotation under load. The L-3322B's precision load-rated bearing is engineered to handle rotational forces at full working load — smoothly, consistently, and without binding or degrading hook performance. The result is cleaner lifts, less torsional wear on connected rigging, and better load control from hook-on to set-down.\u003c\/p\u003e\n\u003cp\u003eEvery L-3322B features QUIC-CHECK® deformation and angle indicators forged directly into the hook body — enabling instant visual assessment of overload deformation and load angle compliance without removing the hook from service. The low-profile hook tip is designed specifically for Crosby S-4320 or PL-N latch kits, with every hook shipping latch pre-installed at no extra cost. Replacement kits are available separately.\u003c\/p\u003e\n\u003cp\u003eForged, quenched, and tempered from high-strength alloy steel in a distinctive red finish, proof tested to 2.5× WLL, built to a 4.5:1 design factor, and meeting or exceeding ASME B30.10 across the full 2 to 15 metric ton range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e2 – 15 metric tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRed (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eFull 360° under load via precision bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInspection\u003c\/td\u003e\n\u003ctd\u003eQUIC-CHECK® deformation \u0026amp; angle indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003ePre-installed S-4320 or PL-N kit; replacements available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B30.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395394778,"sku":"'1028636","price":424.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch-1028645-18__23417_430x_891ee36f-ee5d-4a17-b2de-b01dc0f64d3f.jpg?v=1781868323"},{"product_id":"crosby-l-3322b-3-ton-alloy-ball-bearing-swivel-hook-w-latch","title":"Crosby L-3322B 3 Ton Alloy Ball Bearing Swivel Hook w\/ Latch","description":"\u003cp\u003e\u003cstrong\u003eCrosby L-3322B Bearing Swivel Hook – Full 360° Rotation Under Load. QUIC-CHECK® Built In.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost swivel hooks allow positioning before the lift. The Crosby L-3322B goes further — its precision bearing design enables full 360° rotation under load, allowing loads to naturally align, reposition, and rotate throughout the entire lift cycle without transmitting torsional stress back into the rigging system. For operations where load spin, alignment correction, or rotation during the lift are genuine requirements, the L-3322B is the engineered solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated. Not Just a Swivel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe distinction matters. A standard swivel eye allows pre-lift positioning but is not designed for rotation under load. The L-3322B's precision load-rated bearing is engineered to handle rotational forces at full working load — smoothly, consistently, and without binding or degrading hook performance. The result is cleaner lifts, less torsional wear on connected rigging, and better load control from hook-on to set-down.\u003c\/p\u003e\n\u003cp\u003eEvery L-3322B features QUIC-CHECK® deformation and angle indicators forged directly into the hook body — enabling instant visual assessment of overload deformation and load angle compliance without removing the hook from service. The low-profile hook tip is designed specifically for Crosby S-4320 or PL-N latch kits, with every hook shipping latch pre-installed at no extra cost. Replacement kits are available separately.\u003c\/p\u003e\n\u003cp\u003eForged, quenched, and tempered from high-strength alloy steel in a distinctive red finish, proof tested to 2.5× WLL, built to a 4.5:1 design factor, and meeting or exceeding ASME B30.10 across the full 2 to 15 metric ton range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e2 – 15 metric tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRed (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eFull 360° under load via precision bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInspection\u003c\/td\u003e\n\u003ctd\u003eQUIC-CHECK® deformation \u0026amp; angle indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003ePre-installed S-4320 or PL-N kit; replacements available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B30.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395493082,"sku":"'1028618","price":220.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch-1028645-18__23417_430x_f1af3f57-0c8f-47f3-83a4-d039edc0919b.jpg?v=1781868326"},{"product_id":"crosby-l-3322b-2-ton-alloy-ball-bearing-swivel-hook-w-latch","title":"Crosby L-3322B 2 Ton Alloy Ball Bearing Swivel Hook w\/ Latch","description":"\u003cp\u003e\u003cstrong\u003eCrosby L-3322B Bearing Swivel Hook – Full 360° Rotation Under Load. QUIC-CHECK® Built In.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost swivel hooks allow positioning before the lift. The Crosby L-3322B goes further — its precision bearing design enables full 360° rotation under load, allowing loads to naturally align, reposition, and rotate throughout the entire lift cycle without transmitting torsional stress back into the rigging system. For operations where load spin, alignment correction, or rotation during the lift are genuine requirements, the L-3322B is the engineered solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated. Not Just a Swivel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe distinction matters. A standard swivel eye allows pre-lift positioning but is not designed for rotation under load. The L-3322B's precision load-rated bearing is engineered to handle rotational forces at full working load — smoothly, consistently, and without binding or degrading hook performance. The result is cleaner lifts, less torsional wear on connected rigging, and better load control from hook-on to set-down.\u003c\/p\u003e\n\u003cp\u003eEvery L-3322B features QUIC-CHECK® deformation and angle indicators forged directly into the hook body — enabling instant visual assessment of overload deformation and load angle compliance without removing the hook from service. The low-profile hook tip is designed specifically for Crosby S-4320 or PL-N latch kits, with every hook shipping latch pre-installed at no extra cost. Replacement kits are available separately.\u003c\/p\u003e\n\u003cp\u003eForged, quenched, and tempered from high-strength alloy steel in a distinctive red finish, proof tested to 2.5× WLL, built to a 4.5:1 design factor, and meeting or exceeding ASME B30.10 across the full 2 to 15 metric ton range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e2 – 15 metric tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRed (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eFull 360° under load via precision bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInspection\u003c\/td\u003e\n\u003ctd\u003eQUIC-CHECK® deformation \u0026amp; angle indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003ePre-installed S-4320 or PL-N kit; replacements available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B30.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395591386,"sku":"'1028609","price":205.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch-1028645-18__23417_430x_d1cf82fa-a55e-4ce4-b839-98e993f65ea6.jpg?v=1781868330"},{"product_id":"crosby-l-3322b-5-ton-alloy-ball-bearing-swivel-hook-w-latch","title":"Crosby L-3322B 5 Ton Alloy Ball Bearing Swivel Hook w\/ Latch","description":"\u003cp\u003e\u003cstrong\u003eCrosby L-3322B Bearing Swivel Hook – Full 360° Rotation Under Load. QUIC-CHECK® Built In.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost swivel hooks allow positioning before the lift. The Crosby L-3322B goes further — its precision bearing design enables full 360° rotation under load, allowing loads to naturally align, reposition, and rotate throughout the entire lift cycle without transmitting torsional stress back into the rigging system. For operations where load spin, alignment correction, or rotation during the lift are genuine requirements, the L-3322B is the engineered solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated. Not Just a Swivel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe distinction matters. A standard swivel eye allows pre-lift positioning but is not designed for rotation under load. The L-3322B's precision load-rated bearing is engineered to handle rotational forces at full working load — smoothly, consistently, and without binding or degrading hook performance. The result is cleaner lifts, less torsional wear on connected rigging, and better load control from hook-on to set-down.\u003c\/p\u003e\n\u003cp\u003eEvery L-3322B features QUIC-CHECK® deformation and angle indicators forged directly into the hook body — enabling instant visual assessment of overload deformation and load angle compliance without removing the hook from service. The low-profile hook tip is designed specifically for Crosby S-4320 or PL-N latch kits, with every hook shipping latch pre-installed at no extra cost. Replacement kits are available separately.\u003c\/p\u003e\n\u003cp\u003eForged, quenched, and tempered from high-strength alloy steel in a distinctive red finish, proof tested to 2.5× WLL, built to a 4.5:1 design factor, and meeting or exceeding ASME B30.10 across the full 2 to 15 metric ton range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e2 – 15 metric tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRed (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eFull 360° under load via precision bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInspection\u003c\/td\u003e\n\u003ctd\u003eQUIC-CHECK® deformation \u0026amp; angle indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003ePre-installed S-4320 or PL-N kit; replacements available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B30.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395689690,"sku":"'1028627","price":293.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-l-3322b-11-ton-alloy-ball-bearing-swivel-hook-w-latch-1028645-18__23417_430x_45953092-4d7a-4b3a-9fa8-d96003e6c348.jpg?v=1781868333"},{"product_id":"crosby-1-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-59700-lbs-wll","title":"Crosby 1\" S-13326AH Shur-Loc Grade 100 Self-Closing Swivel Handle Hook - 59700 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby S-13326AH SHUR-LOC® Handle Swivel Hook – Rotates Under Load. Locks Automatically. OSHA Approved.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe S-1316AH fixes the point. The S-13326AH frees it. Where a fixed eye hook holds position, the Crosby S-13326AH SHUR-LOC® Handle Swivel Hook introduces a critical operational advantage — an internal anti-friction bearing that allows smooth, free rotation under load. For precision lifts, rotation-intensive operations, and personnel lifting scenarios where load alignment and repositioning mid-lift are genuine requirements, the S-13326AH is the correct tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated Rotation. No Twisting. No Binding.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal anti-friction bearing isn't a passive swivel — it's an engineered, load-rated rotation system that allows the hook to turn freely under full working load without binding, twisting the rigging assembly, or transferring torsional stress to the connected chain or wire rope. For operations where loads naturally want to rotate during the lift, the S-13326AH absorbs that movement cleanly — protecting the rigging system and keeping the load under control throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHUR-LOC® Safety — Automatic Engagement. One-Hand Release.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe self-locking SHUR-LOC® latch engages automatically the moment load is applied — no manual intervention, no forgotten lock-off. The recessed secondary trigger prevents accidental release from incidental gloved contact, while the replaceable pull trigger ensures the hook remains serviceable over its full working life without requiring full replacement. The wide ergonomic handle is designed for confident, controlled operation in gloves, at height, and under pressure — exactly the conditions where hook handling matters most.\u003c\/p\u003e\n\u003cp\u003eCompliant with OSHA 1926.1431(g)(1)(i)(A) for personnel lifting when properly installed and locked, fatigue rated to 20,000 cycles at 1.5× WLL, proof tested to 2.5× WLL, and rated for both wire rope and Grade 100 alloy chain across a WLL range of 22,600 to 59,700 lbs — all to a 4:1 design factor.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e22,600 – 59,700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Size Range\u003c\/td\u003e\n\u003ctd\u003e5\/8\" – 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal anti-friction bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eSelf-locking SHUR-LOC® — auto-engages under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePersonnel Lifting\u003c\/td\u003e\n\u003ctd\u003eOSHA 1926.1431(g)(1)(i)(A) compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eWire rope \u0026amp; Grade 100 alloy chain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395755226,"sku":"VERIFY-SKU-1in","price":3680.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-3-4-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-35300-lbs-wll-1005023-42__23374_430x_6a5404f3-3ef7-4a43-98e1-185d7e141fe9.jpg?v=1781868338"},{"product_id":"crosby-5-8-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-22600-lbs-wll","title":"Crosby 5\/8\" S-13326AH Shur-Loc Grade 100 Self-Closing Swivel Handle Hook - 22600 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby S-13326AH SHUR-LOC® Handle Swivel Hook – Rotates Under Load. Locks Automatically. OSHA Approved.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe S-1316AH fixes the point. The S-13326AH frees it. Where a fixed eye hook holds position, the Crosby S-13326AH SHUR-LOC® Handle Swivel Hook introduces a critical operational advantage — an internal anti-friction bearing that allows smooth, free rotation under load. For precision lifts, rotation-intensive operations, and personnel lifting scenarios where load alignment and repositioning mid-lift are genuine requirements, the S-13326AH is the correct tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated Rotation. No Twisting. No Binding.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal anti-friction bearing isn't a passive swivel — it's an engineered, load-rated rotation system that allows the hook to turn freely under full working load without binding, twisting the rigging assembly, or transferring torsional stress to the connected chain or wire rope. For operations where loads naturally want to rotate during the lift, the S-13326AH absorbs that movement cleanly — protecting the rigging system and keeping the load under control throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHUR-LOC® Safety — Automatic Engagement. One-Hand Release.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe self-locking SHUR-LOC® latch engages automatically the moment load is applied — no manual intervention, no forgotten lock-off. The recessed secondary trigger prevents accidental release from incidental gloved contact, while the replaceable pull trigger ensures the hook remains serviceable over its full working life without requiring full replacement. The wide ergonomic handle is designed for confident, controlled operation in gloves, at height, and under pressure — exactly the conditions where hook handling matters most.\u003c\/p\u003e\n\u003cp\u003eCompliant with OSHA 1926.1431(g)(1)(i)(A) for personnel lifting when properly installed and locked, fatigue rated to 20,000 cycles at 1.5× WLL, proof tested to 2.5× WLL, and rated for both wire rope and Grade 100 alloy chain across a WLL range of 22,600 to 59,700 lbs — all to a 4:1 design factor.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e22,600 – 59,700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Size Range\u003c\/td\u003e\n\u003ctd\u003e5\/8\" – 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal anti-friction bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eSelf-locking SHUR-LOC® — auto-engages under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePersonnel Lifting\u003c\/td\u003e\n\u003ctd\u003eOSHA 1926.1431(g)(1)(i)(A) compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eWire rope \u0026amp; Grade 100 alloy chain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395853530,"sku":"VERIFY-SKU-5\/8","price":1482.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-3-4-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-35300-lbs-wll-1005023-42__23374_430x_110a4232-87f2-4b45-95e1-8b9b32cf522d.jpg?v=1781868342"},{"product_id":"crosby-7-8-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-42700-lbs-wll","title":"Crosby 7\/8\" S-13326AH Shur-Loc Grade 100 Self-Closing Swivel Handle Hook - 42700 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby S-13326AH SHUR-LOC® Handle Swivel Hook – Rotates Under Load. Locks Automatically. OSHA Approved.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe S-1316AH fixes the point. The S-13326AH frees it. Where a fixed eye hook holds position, the Crosby S-13326AH SHUR-LOC® Handle Swivel Hook introduces a critical operational advantage — an internal anti-friction bearing that allows smooth, free rotation under load. For precision lifts, rotation-intensive operations, and personnel lifting scenarios where load alignment and repositioning mid-lift are genuine requirements, the S-13326AH is the correct tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated Rotation. No Twisting. No Binding.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal anti-friction bearing isn't a passive swivel — it's an engineered, load-rated rotation system that allows the hook to turn freely under full working load without binding, twisting the rigging assembly, or transferring torsional stress to the connected chain or wire rope. For operations where loads naturally want to rotate during the lift, the S-13326AH absorbs that movement cleanly — protecting the rigging system and keeping the load under control throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHUR-LOC® Safety — Automatic Engagement. One-Hand Release.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe self-locking SHUR-LOC® latch engages automatically the moment load is applied — no manual intervention, no forgotten lock-off. The recessed secondary trigger prevents accidental release from incidental gloved contact, while the replaceable pull trigger ensures the hook remains serviceable over its full working life without requiring full replacement. The wide ergonomic handle is designed for confident, controlled operation in gloves, at height, and under pressure — exactly the conditions where hook handling matters most.\u003c\/p\u003e\n\u003cp\u003eCompliant with OSHA 1926.1431(g)(1)(i)(A) for personnel lifting when properly installed and locked, fatigue rated to 20,000 cycles at 1.5× WLL, proof tested to 2.5× WLL, and rated for both wire rope and Grade 100 alloy chain across a WLL range of 22,600 to 59,700 lbs — all to a 4:1 design factor.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e22,600 – 59,700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Size Range\u003c\/td\u003e\n\u003ctd\u003e5\/8\" – 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal anti-friction bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eSelf-locking SHUR-LOC® — auto-engages under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePersonnel Lifting\u003c\/td\u003e\n\u003ctd\u003eOSHA 1926.1431(g)(1)(i)(A) compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eWire rope \u0026amp; Grade 100 alloy chain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077395984602,"sku":"VERIFY-SKU-7\/8","price":3032.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-3-4-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-35300-lbs-wll-1005023-42__23374_430x_77f27812-b62b-4160-b705-a337d85621fc.jpg?v=1781868345"},{"product_id":"crosby-3-4-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-35300-lbs-wll","title":"Crosby 3\/4\" S-13326AH Shur-Loc Grade 100 Self-Closing Swivel Handle Hook - 35300 lbs WLL","description":"\u003cp\u003e\u003cstrong\u003eCrosby S-13326AH SHUR-LOC® Handle Swivel Hook – Rotates Under Load. Locks Automatically. OSHA Approved.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe S-1316AH fixes the point. The S-13326AH frees it. Where a fixed eye hook holds position, the Crosby S-13326AH SHUR-LOC® Handle Swivel Hook introduces a critical operational advantage — an internal anti-friction bearing that allows smooth, free rotation under load. For precision lifts, rotation-intensive operations, and personnel lifting scenarios where load alignment and repositioning mid-lift are genuine requirements, the S-13326AH is the correct tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing-Rated Rotation. No Twisting. No Binding.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal anti-friction bearing isn't a passive swivel — it's an engineered, load-rated rotation system that allows the hook to turn freely under full working load without binding, twisting the rigging assembly, or transferring torsional stress to the connected chain or wire rope. For operations where loads naturally want to rotate during the lift, the S-13326AH absorbs that movement cleanly — protecting the rigging system and keeping the load under control throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHUR-LOC® Safety — Automatic Engagement. One-Hand Release.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe self-locking SHUR-LOC® latch engages automatically the moment load is applied — no manual intervention, no forgotten lock-off. The recessed secondary trigger prevents accidental release from incidental gloved contact, while the replaceable pull trigger ensures the hook remains serviceable over its full working life without requiring full replacement. The wide ergonomic handle is designed for confident, controlled operation in gloves, at height, and under pressure — exactly the conditions where hook handling matters most.\u003c\/p\u003e\n\u003cp\u003eCompliant with OSHA 1926.1431(g)(1)(i)(A) for personnel lifting when properly installed and locked, fatigue rated to 20,000 cycles at 1.5× WLL, proof tested to 2.5× WLL, and rated for both wire rope and Grade 100 alloy chain across a WLL range of 22,600 to 59,700 lbs — all to a 4:1 design factor.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWLL Range\u003c\/td\u003e\n\u003ctd\u003e22,600 – 59,700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain Size Range\u003c\/td\u003e\n\u003ctd\u003e5\/8\" – 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged alloy steel, quenched \u0026amp; tempered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003eInternal anti-friction bearing — rotates under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch\u003c\/td\u003e\n\u003ctd\u003eSelf-locking SHUR-LOC® — auto-engages under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFatigue Rating\u003c\/td\u003e\n\u003ctd\u003e20,000 cycles at 1.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof Test\u003c\/td\u003e\n\u003ctd\u003e2.5× WLL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePersonnel Lifting\u003c\/td\u003e\n\u003ctd\u003eOSHA 1926.1431(g)(1)(i)(A) compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eWire rope \u0026amp; Grade 100 alloy chain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosby","offers":[{"title":"Default Title","offer_id":48077396213978,"sku":"'1005023","price":2238.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/8011\/1578\/files\/altu-supply-crosby-3-4-s-13326ah-shur-loc-grade-100-self-closing-swivel-handle-hook-35300-lbs-wll-1005023-42__23374_430x_4df2fcd8-9bb6-422c-bf73-06a121311d3c.jpg?v=1781868349"}],"url":"https:\/\/www.altusupply.com\/collections\/hooks.oembed?page=2","provider":"ALTU Supply","version":"1.0","type":"link"}